مجلة أجسر – مجلة عربية محكمة في مجال العلوم – زورو موقعنا

الوقت

12:55 مساءً

تاريخ النشر

25, مارس 2019

الكاتب

وحدة الدراسات والبحوث

منظمة المجتمع العلمي العربي

  • تاريخ التحديث: 18 رجب 1440 – الموافق 25 آذار/مارس 2019.
  • المصدر: (Web of Science (ISI.
  • نوع الأوراق: (Document Type = (ARTICLE OR REVIEW.
  • Manufacturing Engineering
  • تغطي هذه المجموعة من الأوراق الموارد المتعلقة بتحويل المواد الخام إلى منتجات للاستخدام النهائي أو مواد مصنعة. تشمل مواضيع مثل: التصنيع المتكامل بالحاسوب (CIM)، التصميم بمساعدة الحاسوب (CAD)، التصنيع بمساعدة الحاسوب (CAM)، تصميم المنتجات والأدوات والآلات، رقابة جودة، الجدولة، الإنتاج ومراقبة المخزون.

 

  1. Abrasive waterjet cutting of cladded material: kerf taper and MRR analysis
    – By: Ishfaq, Kashif; Mufti, Nadeem Ahmad; Ahmed, Naveed;
    – et al. MATERIALS AND MANUFACTURING PROCESSES
    – Volume: 34   Issue: 5  Pages: 544-553   Published: APR 4 2019
     
  2. Selection of optimal conditions in the surface grinding process using the quantum based optimisation method
    – By: Alajmi, Mahdi S.; Alfares, Fawzan S.; Alfares, Mohamed S.
    – JOURNAL OF INTELLIGENT MANUFACTURING
    – Volume: 30   Issue: 3  Pages: 1469-1481   Published: MAR 2019
     
  3. Nickel effects on the structural and some physical properties of the eutectic Sn-Ag lead-free solder alloy
    – By: Gumaan, Mohammed S.; Shalaby, Rizk Mostafa; Yousef, Mustafa Kamal Mohammed;
    – et al. SOLDERING & SURFACE MOUNT TECHNOLOGY
    – Volume: 31   Issue: 1  Pages: 40-51   Published: FEB 18 2019
     
  4. Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints
    – By: Haoues, Mohammed; Dahane, Mohammed; Mouss, Nadia Kenza
    – JOURNAL OF INTELLIGENT MANUFACTURING
    – Volume: 30   Issue: 2  Pages: 701-725   Published: FEB 2019
     
  5. Multi-objective robust design optimization of a sewing mechanism under uncertainties
    – By: Najlawi, Bilel; Nejlaoui, Mohamed; Affi, Zouhaier;
    – et al. JOURNAL OF INTELLIGENT MANUFACTURING
    – Volume: 30   Issue: 2  Pages: 783-794   Published: FEB 2019
     
  6. Prediction of residual stress profile and optimization of surface conditions induced by laser shock peening process using artificial neural networks
    – By: Ayeb, M.; Frija, M.; Fathallah, R.
    – INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2455-2471   Published: FEB 2019
     
  7. Thermal aspects in machining CFRPs: effect of cutter type and cutting parameters
    – By: Sheikh-Ahmad, J. Y.; Almaskari, F.; Hafeez, F.
    – INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2569-2582   Published: FEB 2019
     
  8. Modeling of rate dependency of mechanical behavior of superelastic NiTi alloy under cyclic loading
    – By: Sarraj, Riheme; Letaief, Wissem Elkhal; Hassine, Tarek;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2715-2724   Published: FEB 2019
     
  9. An NSGA-II-based multiobjective approach for real-time routing selection in a flexible manufacturing system under uncertainty and reliability constraints
    – By: Souier, Mehdi; Dahane, Mohammed; Maliki, Fouad
    – INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2813-2829   Published: FEB 2019
     
  10. Fatigue life enhancement of TIG-welded 304L stainless steels by shot peening
    – By: Benchouia, S.; Merakeb, N.; Adjel, S.;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2885-2893   Published: FEB 2019
     
  11. Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function
    – By: Saidi, Riadh; Ben Fathallah, Brahim; Mabrouki, Tarek;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 9-12   Pages: 2945-2968   Published: FEB 2019
     
  12. Optimization of mechanical properties of printed acrylonitrile butadiene styrene using RSM design
    – By: Abid, Sana; Messadi, Rihab; Hassine, Tarek;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 5-8   Special Issue: SI   Pages: 1363-1372   Published: FEB 2019
     
  13. Experimental investigation of the cutting forces and edge chipping in ultrasonic-assisted drilling of soda glass
    – By: Abdelkawy, Abdallah; Hossam, Mohab; El-Hofy, Hassan
    – INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 5-8   Special Issue: SI   Pages: 1433-1449   Published: FEB 2019
     
  14. On designing Maxwell CUSUM control chart: an efficient way to monitor failure rates in boring processes
    – By: Hossain, M. Pear; Sanusi, Ridwan A.; Omar, M. Hafidz;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 5-8   Special Issue: SI   Pages: 1923-1930   Published: FEB 2019
     
  15. On auxiliary information-based control charts for autocorrelated processes with application in manufacturing industry
    – By: Ahmad, Shabbir; Riaz, Muhammad; Hussain, Shahid;
    – et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    – Volume: 100   Issue: 5-8   Special Issue: SI   Pages: 1965-1980   Published: FEB 2019
     
  16. Warranty and maintenance analysis of sensor embedded products using internet of things in industry 4.0
    – By: Alqahtani, Ammar Y.; Gupta, Surendra M.; Nakashima, Kenichi
    – INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS
    – Volume: 208  Pages: 483-499   Published: FEB 2019
     
  17. Lot sizing problem with batch ordering under periodic buyback contract and lost sales
    – By: Farhat, Mlouka; Akbalik, Ayse; Hadj-Alouane, Atidel B.;
    – et al. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS
    – Volume: 208  Pages: 500-511   Published: FEB 2019
     
  18. Improving damage resistance and load capacity of thin-ply laminates using ply clustering and small mismatch angles
    – By: Wagih, A.; Maimi, P.; Blanco, N.;
    – et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    – Volume: 117   Pages: 76-91   Published: FEB 2019
     
  19. Correlation of structural and optical properties in as-prepared and annealed Bi2Se3 thin films
    – By: Adam, A. M.; Lilov, E.; Ibrahim, E. M. M.;
    – et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    – Volume: 264   Pages: 76-83   Published: FEB 2019
     
  20. Friction stir welding of high density polyethylene-Carbon black composite
    – By: Sheikh-Ahmad, J. Y.; Ali, Dima S.; Deveci, Suleyman;
    – et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    – Volume: 264  Pages: 402-413   Published: FEB 2019
     
  21. Synergistic integrated design of an electrochemical mechanical polishing end-effector for robotic polishing applications
    – By: Mohammad, Abd El Khalick; Hong, Jie; Wang, Danwei;
    – et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
    – Volume: 55   Pages: 65-75   Part: A   Published: FEB 2019
     
  22. Investigation on material mixing during FSW of AA7475 to AISI304
    – By: Goel, Pankul; Khan, Noor Zaman; Khan, Zahid A.;
    – et al. MATERIALS AND MANUFACTURING PROCESSES
    – Volume: 34   Issue: 2   Pages: 192-200   Published: JAN 25 2019
     
  23. Structural equation modeling of lean manufacturing practices in a developing country context
    – By: Shrafat, Fayiz Dahash; Ismail, Mohammad
    – JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT
    – Volume: 30   Issue: 1   Pages: 122-145   Published: JAN 21 2019
     
  24. Application of vendor rationalization strategy for manufacturing cycle time reduction in engineer to order (ETO) environment A case study
    – By: Seth, Dinesh; Rastogi, Subhash
    – JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT
    – Volume: 30   Issue: 1   Pages: 261-290   Published: JAN 21 2019
     
  25. Scheduling on uniform parallel machines with periodic unavailability constraints
    – By: Kaabi, Jihene; Harrath, Youssef
    – INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
    – Volume: 57   Issue: 1   Pages: 216-227   Published: JAN 2 2019
     
  26. Machinability of titanium alloy through electric discharge machining
    – By: Ahmed, Naveed; Ishfaq, Kashif; Moiduddin, Khaja;
    – et al. MATERIALS AND MANUFACTURING PROCESSES
    – Volume: 34   Issue: 1  Pages: 93-102   Published: JAN 2 2019
     
  27. Friction Drilling of Cast Aluminum Alloy A380 Without Significant Petal Formation and Radial Fracture
    – By: El-Bahloul, Sara Ahmed
    – INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
    – Volume: 20   Issue: 1   Pages: 45-52   Published: JAN 2019
     
  28. Speeding-up simulation of cogging process by multigrid method
    – By: Ramadan, Mohamad; Khaled, Mahmoud; Fourment, Lionel
    – INTERNATIONAL JOURNAL OF MATERIAL FORMING
    – Volume: 12   Issue: 1  Pages: 45-55   Published: JAN 2019
     
  29. A proposal improvement in flatness measurement in strip rolling
    – By: Abdelkhalek, Sami
    – INTERNATIONAL JOURNAL OF MATERIAL FORMING
    – Volume: 12   Issue: 1  Pages: 89-96   Published: JAN 2019
     
  30. Novel plasma treatment for preparation of laser sintered nanocomposite parts
    – By: Almansoori, Alaa; Abrams, Kerry J.; Al-Rubaye, Ammar D. Ghali;
    – et al. ADDITIVE MANUFACTURING
    – Volume: 25   Pages: 297-306   Published: JAN 2019

 

الباحث الكريم.. ندعوك للكتابة عن ورقتك في هذه القائمة في مقال باللغة العربية لمزيد من التعريف ببحثك

الباحث الكريم .. ندعوك للكتابة عن ورقتك في هذه القائمة في مقال باللغة العربية لمزيد من التعريف ببحثك

info@arsco.org: البريد الإلكتروني

ترخيص عام

الموقع قائم على مبدأ الترخيص العام للجمهور في حرية النسخ والنقل والاقتباس من جميع المحتويات والنشرات والكتب والمقالات، دون مقابل وبشكل مجاني أبدي، شريطة أن يكون العمل المستفيد من النسخ أو النقل أو الاقتباس متاحا بترخيص مجاني وبذات شروط هذا الموقع، وأن تتم الاشارة إلى منشورنا وفق الأصول العلمية، ذكرا للكاتب والعنوان والموقع والتاريخ.

هذا والموقع يساعد المؤلف على نشر إنتاجه بلا مقابل من منفعة معنوية أو مادية، شريطة أن يكون العمل متوفراً للنسخ أو النقل أو الاقتباس للجمهور بشكل مجاني. ثم إن التكاليف التي يتكبدها الموقع والعاملون عليه تأتي من مساعدات ومعونات يقبلها الموقع ما لم تكن مرتبطة بأي شرط مقابل تلك المعونات.

license
0 التعليقات
Inline Feedbacks
View all comments
ضيف
ضيف
03/26/2019 12:50 مساءً
عنوان التعليق
موضوع اليات الارتقاء بتقنية التصنيع المحلي
guest

شبكاتنا الاجتماعية

  • facebok
  • twitter
  • Instagram
  • Telegram
  • Youtube
  • Sound Cloud

يسعدنا أن تشاركونا أرائكم وتعليقاتكم حول هذهِ المقالة عبر التعليقات المباشرة بالأسفل أو عبر وسائل التواصل الإجتماعي الخاصة بالمنظمة

icons
0
Would love your thoughts, please comment.x
()
x