- Pervious concrete pavement incorporating GGBS to alleviate pavement runoff and improve urban sustainability
– By: El-Hassan, Hilal; Kianmehr, Peiman ROAD MATERIALS AND PAVEMENT DESIGN
– Volume: 19 Issue: 1 Pages: 167-181 Published: 2018
-
Sustainability assessment framework for small-sized urban neighbourhoods: An application of fuzzy synthetic evaluation
– By: Haider, Husnain; Hewage, Kasun; Umer, Adil; et al. SUSTAINABLE CITIES AND SOCIETY
– Volume: 36 Pages: 21-32 Published: JAN 2018
-
Experimental investigation of phase change materials for insulation of residential buildings
– By: Hasan, Mushtaq I.; Basher, Hadi O.; Shdhan, Ahmed O. SUSTAINABLE CITIES AND SOCIETY
– Volume: 36 Pages: 42-58 Published: JAN 2018
-
Impact of large PV and wind power plants on voltage and frequency stability of Jordan's national grid
– By: Feilat, E. A.; Azzam, S.; Al-Salaymeh, A. SUSTAINABLE CITIES AND SOCIETY
– Volume: 36 Pages: 257-271 Published: JAN 2018
-
Multiscale 3D finite-element modelling of the thermal conductivity of clay brick walls
– By: Alghamdi, Abdulrahman A.; Alharthi, Hamzah A. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 1-9 Published: DEC 30 2017
-
Physico-mechanical and durability characteristics of concrete paving blocks incorporating cement kiln dust
– By: Sadek, Dina M.; El-Attar, Mohamed M.; Ali, Ahmed M. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 300-312 Published: DEC 30 2017
-
Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars
– By: Khalil, Noura; Aouad, Georges; El Cheikh, Khadija; et al. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 382-391 Published: DEC 30 2017
-
Fabrication of geopolymer bricks using ceramic dust waste
– By: Amin, Sh. K.; El-Sherbiny, S. A.; El-Magd, A. A. M. Abo; et al. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 610-620 Published: DEC 30 2017
-
Experimental and FE parametric study on continuous steel-concrete composite beams strengthened with CFRP laminates
– By: El-Zohairy, Ayman; Salim, Hani; Shaaban, Hesham; et al. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 885-898 Published: DEC 30 2017
-
Curing optimization for strength and durability of silica fume and fuel ash concretes under hot weather conditions
– By: Khan, M. I.; Abbas, Y. M. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 1092-1105 Published: DEC 30 2017
-
Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect)
– By: Gadri, Karima; Guettala, Abdelhamid CONSTRUCTION AND BUILDING MATERIALS
– Volume: 157 Pages: 1133-1144 Published: DEC 30 2017
-
The effect of nano-MgO on the setting time, autogenous shrinkage, microstructure and mechanical properties of high performance cement paste and mortar
– By: Polat, Riza; Demirboga, Ramazan; Karagol, Fatma
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 156 Pages: 208-218 Published: DEC 15 2017
-
Concrete filled PVC tube: A review
– By: Abdulla, Nwzad Abduljabar CONSTRUCTION AND BUILDING MATERIALS
– Volume: 156 Pages: 321-329 Published: DEC 15 2017
-
Cleaning innovative daylighting systems: Review and suggested methods
– By: Mayhoub, M. LIGHTING RESEARCH & TECHNOLOGY
– Volume: 49 Issue: 8 Pages: 1015-1033 Published: DEC 2017
-
The differential drying shrinkage effect on the concrete surface damage: Experimental and numerical study
– By: Samouh, Hamza; Roziere, Emmanuel; Loukili, Ahmed
– CEMENT AND CONCRETE RESEARCH
– Volume: 102 Pages: 212-224 Published: DEC 2017
-
Flexural behavior and analysis of reinforced concrete beams made of recycled PET waste concrete
– By: Mohammed, Azad A. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 155 Pages: 593-604 Published: NOV 30 2017
-
Effect of silica fume and steel slag coarse aggregate on the corrosion resistance of steel bars
– By: Heniegal, Ashraf M.; Amin, Mohamed; Youssef, Hassan
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 155 Pages: 846-851 Published: NOV 30 2017
-
Ultrasound monitoring of a mortar hydration using Argand Diagram: The effect of sand grain size and temperature
– By: Bita, Hassan; Faiz, Bouazza; Moudden, Ali; et al.
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 155 Pages: 1003-1012 Published: NOV 30 2017
-
A pattern recognition approach for modeling the air change rates in naturally ventilated buildings from limited steady-state CFD simulations
– By: Mousa, Wael A. Yousef; Lang, Werner; Auer, Thomas; et al. ENERGY AND BUILDINGS
– Volume: 155 Pages: 54-65 Published: NOV 15 2017
-
The influence of chilled water on the performance of direct evaporative cooling
– By: Al-Badri, Alaa Ruhma; Al-Waaly, Ahmed A. Y. ENERGY AND BUILDINGS
– Volume: 155 Pages: 143-150 Published: NOV 15 2017
-
Experimental study on using PCMs of different melting temperatures in one cooling vest to reduce its weight and improve comfort
– By: Ouahrani, Djamel; Itani, Mariam; Ghaddar, Nesreen; et al. ENERGY AND BUILDINGS
– Volume: 155 Pages: 533-545 Published: NOV 15 2017
-
Residual strength of high strength concentric column-SFRC flat plate exposed to high temperatures
– By: Arna'ot, Farid H.; Abbass, Ahmmad A.; Abualtemen, Ahmed Abbas; et al.
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 204-218 Published: NOV 15 2017
-
TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures
– By: Raoof, Saad M.; Bournas, Dionysios A.
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 424-437 Published: NOV 15 2017
-
Assessment of bond strength of NSM CFRP strips embedded in concrete using cementitious adhesive made with graphene oxide
– By: Mohammed, Alyaa; Al-Saadi, Nihad Tareq Khshain; Al-Mahaidi, Riadh
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 504-513 Published: NOV 15 2017
-
Influence of fineness of volcanic ash and its blends with quarry dust and slag on compressive strength of mortar under different curing temperatures
– By: Khan, Kaffayatullah; Amin, Muhammad Nasir
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 514-528 Published: NOV 15 2017
-
Recovering flexural performance of thermally damaged concrete beams using NSM CFRP strips
– By: Haddad, Rami H.; Almomani, Oubaida A
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 632-643 Published: NOV 15 2017
-
Substitution of aluminous cement by calcium carbonates in presence of carboxylic acid
– By: El Hafiane, Y.; Smith, A.; Abouliatim, Y.; et al. CONSTRUCTION AND BUILDING
– MATERIALSVolume: 154 Pages: 711-720 Published: NOV 15 2017
-
Influence of date palm fiber and shrinkage reducing admixture on self-compacting concrete performance at early age in hot-dry environment
– By: Tioua, Tahar; Kriker, Abdelouahed; Barluenga, Gonzalo; et al.
– CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 721-733 Published: NOV 15 2017
-
Modelling mechanical behavior of cementitious material incorporating CNTs using design of experiments
– By: Hassan, Noha M.; Fattah, Kazi P.; Tamimi, Adil K. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 763-770 Published: NOV 15 2017
-
Relationship between the shear capacity and the flexural cracking load of FRP reinforced concrete beams
– By: Alam, M. S.; Hussein, A. CONSTRUCTION AND BUILDING MATERIALS
– Volume: 154 Pages: 819-828 Published: NOV 15 2017